Português
Русский
Español
Francés
ไทย
Bahasa Indonesia
Việt
Türk
Melayu
العربية
A container mixer is a device often used to achieve material mixing and uniform mixing. The following is a detailed description of the container mixer:1. How it works: Container mixers usually consist of a large container and mixing equipment. The material is placed in the container, and then the mixing equipment is activated to mix and stir the material to ensure that the ingredients are fully mixed.2. Applicable materials: The container mixer is suitable for mixing materials of powder, particles, pigments, granular materials, suspended materials and other forms and properties.
Contact Now
Characteristic of powder dispensing equipment:1. The main grinding adopts double-layer thickened noise-reducing grinding body, with low noise.2. High output.3. Concentrated, stable and adjustable particle size distribution.4. Low loss rate, ≤ 2%.5. The temperature rise of the mill is small, and the powder temperature is low.6. Both the front end and the rear end of the mill can be equipped with auxiliary feeding devices.7. Touch screen and PLC control, friendly man-machine interface, easy to operate.8. Grinding body temperature monitoring.9. Perfect security protection system.10.
Contact Now
The main parameters of car roof multi-layer automatic slicing compound feeding machine:1. A-B fiberglass pulling and rubber roller feeding adopt servo motor plus synchronous belt mechanism; station movement and stacking table transmission mechanism adopt motor plus frequency converter plus synchronous belt mechanism.2. The lifting and traversing trolley of the PU board is controlled by a frequency conversion motor, and the rotation is controlled by a servo motor.3. Product size range: the maximum product size is 2500*1500mm, and the minimum product size is 1200*860mm.4.
Contact Now
Main feature:1. The particle size distribution is stable, and the particle size distribution is uniform and adjustable.2. High yield and high recovery rate (≥98%).3. Spiral wind feeding system.4. Separator double-layer cooling.5. Low noise, easy to clean and maintain with a special noise reduction device.6. Safe operation.
Contact Now
Automatic mixer has the following characteristics and advantages:1. Efficient mixing: The automatic mixer can efficiently mix different materials to achieve uniform distribution and consistency, and improve production efficiency and product quality.2. Reduce manual intervention: Compared with manual mixing, automatic mixing machine can reduce manual operation and intervention, improve work efficiency, and reduce the risk of human operation error.3.
Contact Now
The electrical cabinet chassis has the following product advantages:1. Protection performance: The electrical cabinet chassis can provide good physical protection and protect the internal electrical equipment from external dust, moisture, vibration and other damaging factors. They are usually dustproof, waterproof, anti-corrosion and other functions to protect the normal operation of equipment and extend its life.2. Safety: The design of the electrical cabinet chassis takes into account electrical safety and human safety.
Contact Now
Harness holding device is a device used to fix and protect electrical wiring harness, it has the following advantages:1. Provide reliable fixation and protection: The wiring harness fixing device is designed to firmly fix the wiring harness to prevent it from loosening, shaking or external impact. This helps keep the wiring harness neat and compact, avoids interference or wear between wires, and provides reliable electrical connections and transmission. At the same time, they also provide protection from external environmental damage such as vibration, temperature changes, chemicals, etc.2.
Contact Now
The silent room can be customized is a workshop for testing equipment, which can be a mobile silent room. The silent room can be customized adopts sound absorption on four sides and the top surface, and the sound insulation method of the bottom layer makes the room achieve a low-noise environment. Its background noise value in the soundproof room is less than 35-40dB. In addition to the sound absorption system, the soundproof room also needs to be equipped with soundproof doors, windows, ventilation systems, electrical systems, etc. according to the actual situation.
Contact Now
Harness clamp is a tool used to test and assemble electronic harness. Its functions mainly include the following aspects:1. Test function: Harness clamp can be used to test the electrical connectivity and functionality of harness. It is able to check whether the wire connection inside the harness is good by connecting the power supply and the test instrument, and verify that the harness can work properly when running.2.
Contact Now
Product Details Of Powder Coating Extruder JCJ30:Before the extruder starts offevolved to work every time, flip the motor with the crank manage to see if the rotation is effortless and labor-saving. Otherwise, it need to be saved at the method temperature for three to 5 minutes, till the rotation is labor-saving, and then it is allowed to begin operation.Every time the extruder begins to work, the screw runs at a low velocity and feeds a little.
Contact Now
Product Details Of Powder Coating Extruder JCJ75: Before the extruder starts offevolved to work every time, flip the motor with the crank cope with to see if the rotation is handy and labor-saving. Otherwise, it ought to be saved at the procedure temperature for three to 5 minutes, till the rotation is labor-saving, and then it is allowed to begin operation.Every time the extruder starts offevolved to work, the screw runs at a low velocity and feeds a little.
Contact Now
Single screw reciprocating extruder has the following advantages:1. Efficient production: single screw reciprocating extruder adopts reciprocating motion design, through the reciprocating extrusion action, can achieve high-speed and efficient production of plastic products. Compared to traditional single-screw extruders, reciprocating extruders can produce more product in the same amount of time.2. Energy saving: The design of the single-screw reciprocating extruder makes the use of energy more efficient.
Contact Now
SLJ twin screw extruder has the following advantages:1. High production efficiency: SLJ twin screw extruder adopts twin screw structure, with greater extrusion capacity and higher extrusion speed. Compared with a single screw extruder, it can produce more plastic products in the same time, improving production efficiency.2. Good mixing performance: The twin screw extruder can better mix plastic raw materials through two mutually integrated rotating screws. This ensures the uniform distribution and full integration of raw materials and improves the quality of finished products.3.
Contact Now
Performance characteristics of flour millFlour mill occupies a pivotal position in the production of thermosetting electrostatic powder coatings. As the grand finale of the entire production process, it is responsible for the fine grinding of raw materials into high quality coatings. By virtue of its precise grinding ability, the mill can ensure that the fineness and uniformity of the coating product reaches the highest standard, thus meeting the market demand for high-quality coatings.The flour mill's efficient working principle is the key to its excellent performance.
Contact Now
Product Details:When the powder machine is working, the materials entering the grinding area of the grinding disc are crushed by the impact column, and under the action of the suction of the induced draft fan, they go up and down along the two sides of the return circle and enter the separation area to be sprayed out from the material outlet through the fan separator. Due to the high-speed rotation of the fan blade separator, the centrifugal force generated hinders the passage of materials.
Contact Now
A laboratory extruder is a device specially designed for the extrusion process in laboratory research and small-scale production. It has several advantages:1. Flexibility and adjustability: Laboratory extruders can usually provide a wide range of operating parameters and adjustable extrusion process parameters, such as extrusion pressure, extrusion speed, temperature control, etc. This allows researchers to precisely control and adjust the extrusion process as needed to obtain the desired material properties and product properties.2.
Contact Now
mesh gate in industry has many advantages, the following are some common advantages:1. Protect worker safety: Industrial mesh gate can effectively restrict workers from entering dangerous areas and prevent accidents.2. Prevent accidental contact and injury: mesh gate can effectively isolate and prevent workers from coming into contact with dangerous equipment, rotating parts, moving objects, etc., reducing the occurrence of accidental injuries such as collision, cutting, and nip injuries.3.
Contact Now
Dry automatic forming production line for car roof has the following advantages:1. Efficient production: dry automatic molding line adopts automatic equipment and system, which can achieve continuous and efficient production process. Compared with manual manufacturing, it greatly improves the production efficiency and speeds up the manufacturing speed of ceiling components.2. Consistent quality: Through automatic control and precise production process, the dry automatic molding line can produce ceiling parts with consistent quality.
Contact Now
The automobile roof dry automatic molding lines offer many advantages:1. Efficient production: The dry automatic molding line for automobile roofs can achieve efficient production speed and continuous production. Compared with manual operations, automated equipment can complete production steps such as molding and cooling faster, improving production efficiency.2. Consistent product quality: The automobile roof dry automatic molding line can ensure the consistency and quality stability of each ceiling by precisely controlling temperature, pressure and process parameters.
Contact Now
Multi layer slicing automatic composite feeding machine has the following advantages:1. High efficiency: The equipment can realize automatic slicing and compounding process, which greatly improves production efficiency and work efficiency. Compared to manual operation, automated equipment can complete tasks faster and can continue to operate without operator fatigue or rest.2. Accuracy: The multi layer slicing automatic composite feeding machine adopts advanced control and positioning technology, which can achieve high-precision cutting and composite.
Contact Now
Automatic slicing compound feeding machine has the following advantages:1. High efficiency: The machine can automatically slice, compound and feed operations, greatly improving the production efficiency.2. Precision: The machine can precisely control the cutting and compounding of materials, thus ensuring the quality and stability of the product.3. Automation: The machine can automatically complete multiple processes, reducing manual operation and reducing production costs.4.
Contact Now
Auto trunk cover plate automatic edge wrapping equipment has the following advantages:1. Improve production efficiency: Auto trunk cover plate automatic edge wrapping equipment can greatly improve production efficiency. Compared to manual assembly, automated systems can complete each step of roof assembly quickly and accurately.
Contact Now
Car roof dry automatic molding line mainly includes: substrate loader, conveying system (including girder lifting and width adjustment system), two-stage heating and drying furnace, auxiliary material table, mold centering device, mold changing car, printer table, work Steps and safety protection devices, etc.skills requirement:1. The largest substrate and fabric size: 2950×1800mm.2. The production cycle meets the requirement of 45-60 seconds/piece.3. The horizontal height of substrate transmission: 1320mm.4.
Contact Now
Advantages of auto roof multi-layer automatic slicing compound feeding machine include:1. Improve efficiency: Automated cutting and feeding process can greatly improve production efficiency, reduce manual operation and waste of time.2. Accuracy and consistency: The machine can precisely cut and position the fiber reinforced material, ensuring precision and consistency in the composite manufacturing process.3.
Contact Now
