Cooling Belt YPJ1200
Within the method of cooling belt YPJ1200, the paintings of pressing, cooling and crushing substances is finished. The new cloth of the extruder is compressed and cooled by using the pressing curler, and then conveyed by the conveying steel belt and cooled through air. After attaining the crushing curler, it is beaten into small flake materials required by the air classifying mill.
The thickness of the cooling belt can be adjusted arbitrarily inside the range of 0.5-3mm according to the wishes of customers, tablet curler and crushing curler are plated with hard chrome on the floor. YP1200-6 pill press has the traits of great overall performance, huge utility range, simple operation and excessive running reliability.
Product Details:
It is powered by a frequency converter motor, and a reducer powers the sprocket. The crushing roller, the tablet roller, and the nodal stainless steel conveyor belt all move in unison under the control of the reduction system.
As the roller rotates, hot material is introduced into the space between the rollers for extrusion. The material extruded by the extruder falls vertically between the two rollers. Because the surface of the tableting roller has a relatively low temperature and the interior is as cold as water, the material's surface contracts significantly upon contact with it and separates from it, allowing the tableting process to proceed continually. By altering the distance between the tablet rollers, the thickness of the tablet can be changed.
Product parameters:
Cooling strip length | 5000mm |
Cooling strip width | 1200mm |
Total power | 3Kw |
Maximum productivity | 650kg/h |
Submitted successfully
We will contact you as soon as possible