How to maintain powder equipment processing line?

Powder equipment processing line is a powder production line. After the powder equipment is used, it is necessary to do daily maintenance work, which can extend the service life of the product. The following describes the specific maintenance methods:

In the use of equipment period, each shift to the main shaft of the equipment refueling, together to grasp the oil injection time can not be too short or too long, in the oil injection period operators should also grasp the amount of oil, not too much or too little, otherwise it will have a certain impact on the equipment.

Since the powder equipment is mainly broken stone, the material near the characteristics of the stone can also be broken, but the non-broken material such as metal can not play a crushing role. If the non-broken material enters the crushing chamber during the stone crushing period of the equipment, serious damage will be caused to the equipment, and certain damage will be caused to the grinding roller and the grinding ring, the middle hanger, etc., affecting the normal operation of the equipment.

Generally speaking, the air volume control valve is above the fan inlet pipe, and under normal circumstances, the air volume needs to be adjusted to the orientation during the normal operation of the powder equipment. According to the user's demand for product fineness and output value to adjust the air volume, through the adjustment valve, you can control the powder equipment dust until the equipment does not produce dust to stop.