< >

Powder Coating Extruder JCJ75

Powder coating extruder JCJ75 is suitable for thermal microscopic uniform mixing and reaction in the production of thermosetting powder coatings.

The powder coating extruder JCJ75 performs exceptionally well, as evidenced by the following characteristics:

(1) Compact design.

(2) Normal type, ornamental paint, 350-450kg/hr production efficiency.

(3) There is nice blending.

(4) Strong self-cleaning capabilities and no tendency for items to solidify while stored.

(5) The machine is simple to clean.

(6) Cooling progress is swift.

(7) Long lifespan.

Contact Now E-Mail Telephone WhatsApp

Product Details

Product Details Of Powder Coating Extruder JCJ75:

Before the extruder starts offevolved to work every time, flip the motor with the crank cope with to see if the rotation is handy and labor-saving. Otherwise, it ought to be saved at the procedure temperature for three to 5 minutes, till the rotation is labor-saving, and then it is allowed to begin operation.

Every time the extruder starts offevolved to work, the screw runs at a low velocity and feeds a little. After the fabric is extruded, regularly make bigger the screw velocity to the fee required with the aid of the process.

When shutting down after work, Zone 1 and Zone two should be pressured to cool down to room temperature to forestall substances from solidifying.

It is strictly forbidden to preserve the first and second districts in the warmth renovation nation for a lengthy time, and to flip on the desktop for a lengthy time and idle for a lengthy time.

Powder Coating Extruder

Product Parameters:

production capacity	350-450kg
Screw diameter	63mm
aspect ratio	17：1
Number of screws	2
main motor power	37kw
Feeding motor power	0.75kw
heating power	8.4kw
Screw revolutions	0～540 rpm